Cobalt X
Wireless data logger with touchscreen
The data logger that sits on the wall next to the equipment. Up to four measuring points, readings directly on the screen, and wireless transmission to the gateway.
What is Cobalt X, and how does it work?
Cobalt X is the link between the sensor and the system. The sensors are connected to the logger, which reads their values, stores the measurements locally and sends them on to the Gateway over LoRaWAN. If the connection drops, the logger keeps measuring and synchronises when the connection is back, so there is no gap in the graph.
The screen is a touchscreen that can be operated with gloves, and the logger has both sound and light, so a deviation is also visible on site. Calibration data is stored in the sensor and not in the logger, so a sensor can be exchanged without configuring anything.
Specifications
Measuring points
Up to 4
Wireless
LoRaWAN
Screen
Touch, operable with gloves
Alarm on the unit
Sound and light
Local memory
Keeps measuring without a connection
Mounting
Wall next to the equipment
Full specifications and the data sheet are sent with the quote.
How to get it
We do not sell individual parts over the counter. We put the setup together based on what we see on your site and take care of the rest.
Request a quote
Tell us what you want to monitor. We will come back with questions or a proposal.
Walkthrough
We visit, look at your equipment and rooms and advise on quantity and placement.
Installation
We install, set up limits and on-call rotas and train your staff in the system.
Operation and calibration
We look after it afterwards. Calibration on time and sensor exchange without downtime.
Validation
We validate the system, on our own or together with your QA, and deliver the documentation.
Frequently asked questions
Can several sensors share one logger?
Yes. Cobalt X handles up to four measuring points, so two refrigerators side by side can often share one logger.
What happens if the network drops out?
The data logger keeps measuring and stores data locally for up to 28 days. When the connection is back, the measurements are synchronised, so there is no gap in the graph. No alarms are raised for temperature excursions in the meantime, because the logger cannot send data to the platform.
Does the logger need calibrating?
No, it is the sensor that is calibrated. The calibration data is stored in the sensor, so a sensor can be exchanged without configuring the logger.
Can we buy it on its own?
We do not sell individual parts over the counter. Request a quote and we will put the setup together based on what you need.
Related products
The equipment can be combined freely. We put the setup together based on what needs to be measured at your site.
Get in touch with the right specialist quickly.
We help with everything from new monitoring solutions to calibration, validation and technical support.
General enquiries
New projects
IT and technical
Administration
Visit us
Måløv Byvej 229
2760 Måløv
Call us
Mon-Fri, 08-16
Tell us what you need.
Want to see how it would look at your site?
Book a walkthrough. We visit, look at your equipment and rooms and advise on where the sensors should go. You then get a tailored proposal. No obligation.
Book a walkthrough