DICKSON in Denmark
We are the DICKSON distributor in Denmark. They build the equipment, we advise on the setup, install, calibrate and look after the system afterwards.
Who is DICKSON, and what is our role?
DICKSON, formerly OCEASoft, manufactures data loggers, sensors, gateways and the OCEAView software. The equipment is developed and manufactured in France, among other places, and the company has accredited calibration laboratories.
We have been their distributor in Denmark since 2018. That means we sell the equipment, but that is not what the work consists of. The work is figuring out what needs to be measured and where, setting it up, calibrating it and keeping it running afterwards.
The manufacturer builds. We implement, validate and service. The customer owns the data and the system. That division of labour is worth knowing before a project starts.
Why a distributor
A manufacturer in France cannot drop by and look at your refrigerators. We can, and that is what decides whether the setup will work.
At the same time, the partnership means we have access to the data sheets, the firmware and the accredited calibration laboratories behind the equipment.
When you call us, you reach someone who knows your installation. Not a support line in another country.
More about Djurhuus IT →
The division of labour
DICKSON builds
Develops and manufactures data loggers, sensors, gateways and OCEAView. Responsible for firmware and data sheets.
We implement
Advise on placement, install, set up limits and on-call rotas, and service afterwards.
Your system, our maintenance
The system and the measurements are yours. We handle validation, calibration and ongoing maintenance, so you do not have to keep track of it yourselves.
Calibration
Carried out by accredited partners, DFM and DICKSON. We manage the process, intervals and certificates.
Service
Sensor exchange, troubleshooting and expansions. The same people as at installation.
Mapping
We carry it out ourselves, with calibrated equipment and a report that can be used as documentation.
What it means for you in practice
You buy one system, not two suppliers. If something breaks, you call us, and we take it from there with the manufacturer. If the system needs expanding in two years, the same people come, and they already know the setup.
Why DICKSON equipment stands out
We chose DICKSON because two things are solved better than by most: calibration and range.
Smart-Sensor technology
- Calibration data is held in the sensor itself, not in the logger
- Recalibration is an exchange, not weeks of downtime
- Correction coefficients, measurement uncertainty and certificate number follow the sensor
- No configuration on replacement, and therefore no data entry errors
LoRaWAN from the ground up
- Up to 15 km in open air, typically 1 to 2 km through a building
- One gateway for up to 50 data loggers and 100 to 200 sensors
- Runs independently of your IT network, so installation does not wait for approval
- Low power consumption, so battery-powered loggers can stay in place for a long time without being touched
The product range
Data loggers, sensors, gateway and alarm units built to work together.
Cobalt X
Data logger with touchscreen
Cobalt XS
Compact data logger
Emerald
Bluetooth sensor
Connect Gateway
Covers the whole building
LoRa Alert Siren
Sound and light on site
Why choose us as your DICKSON partner
The equipment is the same no matter who you buy it from. What differs is what happens after delivery.
01
We advise on solutions, not products
It is about a complete solution, and that solution can include many different products. That is why we start with a walkthrough and not a catalogue.
02
We install ourselves
Installation is done by the people who have seen the premises. Typically in a day or two, without cables through walls and without stopping operations.
03
Calibration managed by us
Accredited calibration at DFM and DICKSON, and we keep track of the intervals, send freshly calibrated sensors and put the certificates into the system.
04
We carry out mapping ourselves
We do the study with calibrated equipment and deliver a report you can present. It is not something we pass on to the manufacturer.
05
Danish support from Måløv
When you call, you reach someone who knows your installation and can come out to you. Not a support line in another country.
Frequently asked questions
Can we buy directly from DICKSON?
In Denmark it goes through us. That is also what means there is someone to call who can come by.
What if DICKSON changes its product range?
We follow it and tell you what it means for your installation before it becomes a problem.
Do we get Danish support?
Yes. We are based in Måløv, and it is us you talk to.
Who is responsible for the software?
DICKSON develops it. We handle the setup at your site and connect you to the right version, cloud or on-premises.
Can you deliver to other countries?
Yes, we cover all of Scandinavia. If you have operations in other countries, we help you get in touch with the right contact.
De bruger os allerede
Kom hurtigt i kontakt med den rette specialist.
Vi hjælper med alt fra nye monitoreringsløsninger til kalibrering, validering og teknisk support.
Generelle henvendelser
Nye projekter
IT & teknik
Administration
Besøg os
Måløv Byvej 229
2760 Måløv
Ring til os
+45 72 22 02 05
Man-fre, 08-16
Fortæl os, hvad du har brug for.
Vil du se, hvordan det ser ud hos jer?
Book en gennemgang. Vi kommer forbi, ser på udstyr og lokaler og rådgiver om, hvor følerne skal sidde. Derefter får du et skræddersyet forslag. Uden forpligtelser.
Book en gennemgang